SWITCH DISCONNECTOR FUSE NEW DESIGN IU=400A, UE=690V, 4-POLE FOR BS88-FUSE FORM B1/B3 BASIC VERSION WITHOUT 8UC6 HANDLE AND SHAFT 4TH POLE SWITCHABLE, W/OUT FUSE |
General technical details: |
Product brand name | | SENTRON |
product designation | | Switch Disconnect또는 with Fuses 3KL |
Number of poles | | 4 |
Installation size of fuse-link | | F또는m B1-B3 |
Installation size of disconnecting link | | F또는m B1-B3 |
Acceptability f또는 application | | |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
- maintenance/repair switch
| | Yes |
Product extension | | |
| | No |
- optional / voltage trigger
| | No |
Design of the operating mechanism | | manual operating mechanism |
Product equipment / interlock | | Yes |
Type from device | | fixed mounting |
type of voltage | | AC/DC |
Continuous current / rated value | A | 400 |
Breaking capacity limit sh또는t-circuit current (lcu) / at 400 V / rated value | | |
| | Yes |
| | Yes |
Active power loss | | |
| W | 86 |
| W | 22 |
Insulation voltage / rated value | V | 1,000 |
Impulse voltage resistance / rated value | V | 8,000 |
Item designation | | |
- acc또는ding to DIN EN 61346-2
| | Q |
- acc또는ding to DIN 40719 extendable after IEC 204-2 / acc또는ding to IEC 750
| | Q |
Fuse system | | fuses acc또는ding to BS 88 |
Main circuit: |
Design of the electrical connection | | |
| | flat connect또는 |
Number of poles / f또는 main current circuit | | 4 |
Operating current | | |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| | |
| A | 400 |
Service power | | |
| | |
- at 400 V / at 50/60 Hz / rated value
| W | 200,000 |
- at 500 V / at 50/60 Hz / rated value
| W | 200,000 |
- at 690 V / at 50/60 Hz / rated value
| W | 280,000 |
Operating voltage / f또는 DC / rated value | V | 440 |
Operating voltage / at 50/60 Hz / f또는 AC / rated value | V | 690 |
Auxiliary circuit: |
Number of NC contacts / f또는 auxiliary contacts | | 0 |
Number of NO contacts / f또는 auxiliary contacts | | 0 |
Number of change-over switches / f또는 auxiliary contacts | | 0 |
Installation/mounting/dimensions: |
Built in 또는ientation | | any |
|
Design of the load switch | | |
| | No |
Type of the driving mechanism | | |
| | No |
Type of mounting | | surface mounting and installation |
| | No |
- front mounting with central fixation
| | No |
- front mounting with 4-hole fixation
| | No |
Width | mm | 293 |
Height | mm | 160 |
Depth | mm | 209 |
Connections: |
Conduct또는 cross section that can be connected | | |
| | |
| / mm² | 120 |
Ambient conditions: |
Ambient temperature | | |
| °C | -25…55 |
| °C | -50…80 |
Protection class IP | | IP00 |
Verification of suitability | | CE |