| SIMATIC DP, INTERFACE MODULE IM152-1 FOR ET200ISP, FOR STANDARD AND REDUNDANT OPERATION |
| General information |
| Vendor identification (VendorID) | 8110H |
| Supply voltage |
| Mains buffering |
| Mains buffering, min. | f |
| Input current |
| from supply voltage 1L+, max. | 30 mA |
| Power losses |
| Power loss, typ. | 0.5 W |
| Time stamping |
| Description | for each digital input, digital input module, total ET 200iS |
| Accuracy | 20 ms |
| Number of stampable digital inputs, max. | 64; for accuracy class 20 ms |
| Time format | RFC 1119 Internet (ISP) |
| Time resolution | 1 ms |
| Time interval for transmitting the message buffer if a message is present | 1000 ms |
| Time stamp on signal change | rising / falling edge as signal entering or exiting |
| Interfaces |
| Interface physics, RS 485 | Yes; (intrinsically safe) |
| PROFIBUS DP |
| Transmission rate, max. | 1.5 Mbit/s; 9.6 / 19.2 / 45.45 / 93.75 / 187.5 / 500 Kbit/s |
| SYNC capability | Yes |
| FREECE capability | Yes |
| Direct data exchange (slave-to-slave communication) | Yes; Slave to slave as publisher |
| Protocols |
| Further protocols |
| PROFIBUS DP protocol | Yes |
| Isochronous mode |
| Isochronous mode | No |
| Interrupts/diagnostics/status information |
| Alarms |
| Alarms | Yes |
| Acyclic function, interrupts | Yes |
| Acyclic function, parameters | Yes |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostics indication LED |
| Bus fault BF (red) | Yes |
| Group error SF (red) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes |
| Galvanic isolation |
| between supply voltage and electronics | Yes |
| Standards, approvals, certificates |
| CE mark | Yes |
| Use in hazardous areas |
| Type of protection acc. to EN 50020 (CENELEC) | II2 G Ex ib IIC T4 and I M2 Ex ib I |
| Type of protection acc. to KEMA | 04 ATEX 1243 |
| Dimensions |
| Width | 30 mm |
| Height | 129 mm |
| Depth | 136.5 mm |
| Weight |
| Weight, approx. | 245 g |
| Status | Aug 25, 2011 |
