6ES7151-1AB05-0AB0 ET200S, INTERFACE MODULE IM151-1 FO

The actual product may differ from image shown

Product Information

SIMATIC DP, INTERFACE MODULE IM151-1 FO FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 244 BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES CONNECTABLE; BUS INTERFACING VIA INTEGR. FO INTERFACE INCL. TERMINATING MODULE
General information
Vendor identification (VendorID)	806Bh
Supply voltage
Mains buffering
Mains buffering, min.	20 ms
Input current
from supply voltage 1L+, max.	200 mA
Output current
Current output to backplane bus (DC 5 V), max.	700 mA
Power losses
Power loss, typ.	3.3 W
Address area
Addressing volume
Outputs	244 byte
Inputs	244 byte
Interfaces
Interface physics, FOC	Yes; 4 x Simplex socket
PROFIBUS DP
Cable length, max.	2 m
Transmission rate, max.	12 Mbit/s; 9.6 / 19.2 / 45.45 / 93.75 / 187.5 / 500 Kbit/s; 1.5 / 12 Mbit/s
SYNC capability	Yes
FREECE capability	Yes
Direct data exchange (slave-to-slave communication)	Yes
Protocols
Further protocols
PROFIBUS DP protocol	Yes
Isochronous mode
Isochronous mode	No
Interrupts/diagnostics/status information
Alarms
Alarms	Yes
Diagnoses
Diagnostic functions	Yes
Diagnostics indication LED
Bus fault BF (red)	Yes
Group error SF (red)	Yes
Monitoring 24 V voltage supply ON (green)	Yes
Galvanic isolation
between backplane bus and electronics	No
between supply voltage and electronics	No
Permissible potential difference
between different circuits	500 V DC
Isolation
Isolation checked with	57 V DC / 60 V AC
Dimensions
Width	45 mm
Height	119.5 mm
Depth	75 mm
Weight
Weight, approx.	150 g
Status	Sep 16, 2011

Offer your acceptable price, and we may make you satisfied.Your Target Price