|
|
6ES7138-4FA04-0AB0 ET200S, EL-MOD., 4/8 F-DI, DC 24V
- Weight:
- 0.078kg
Product Information| SIMATIC DP, ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (62061) ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF | | Supply voltage | | 24 V DC | Yes | | permissible range, lower limit (DC) | 20.4 V | | permissible range, upper limit (DC) | 28.8 V | | Reverse polarity protection | No | | Encoder supply | | Number of outputs | 2 | | Output voltage | min. L+ (-1.5 V) | | Output current, rated value | 300 mA | | Output current, permissible range | 0 to 300 mA | | Output current | | Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.8 A) | | Power losses | | Power loss, typ. | 4 W | | Address area | | Occupied address area | | Outputs | 4 byte | | Inputs | 6 byte | | Digital inputs | | Number/binary inputs | 8; 8 single channel, 4 two-channel | | Input characteristic curve acc. to IEC 1131, Type 1 | Yes | | Number of simultaneously controllable inputs | 8 | | Input voltage | | Type of input voltage | DC | | Rated value, DC | 24 V | | for signal "0" | -30 to +5 V | | for signal "1" | 15 to 30 V | | Input current | | for signal "1", typ. | 3.7 mA | | Input delay (for rated value of input voltage) | | for standard inputs | | Parameterizable | Yes | | at "0" to "1", min. | 0.3 ms | | at "0" to "1", max. | 17 ms | | at "1" to "0", min. | 0.3 ms | | at "1" to "0", max. | 17 ms | | Cable length | | Cable length, shielded, max. | 200 m | | Cable length unshielded, max. | 200 m | | Encoder | | Connectable encoders | | 2-wire BEROS | No | | Interrupts/diagnostics/status information | | Alarms | | Diagnostic alarm | Yes | | Diagnoses | | Diagnostic functions | Yes | | Diagnostic information readable | Yes | | Short circuit | Yes | | Diagnostics indication LED | | Group error SF (red) | Yes | | Status indicator digital input (green) | Yes | | Galvanic isolation | | Galvanic isolation digital inputs | | between the channels | No | | between the channels and the backplane bus | Yes | | between the channels and the load voltage L+ | No | | Permissible potential difference | | between M internally and the inputs | 75 VDC / 60 VAC | | Isolation | | Isolation checked with | 500 V DC | | Standards, approvals, certificates | | Highest safety class achievable in safety mode | | acc. to EN 954 | Cat. 3 (single-channel), Cat. 4 (two-channel) | | acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) | | Dimensions | | Width | 30 mm | | Height | 81 mm | | Depth | 52 mm | | Weight | | Weight, approx. | 78 g |
Target Price
Offer your acceptable price, and we may make you satisfied.Your Target Price
|
