| SIMATIC DP, ELECTRONIC MODULE ET 200S: 2AI HIGH SPEED I-4WIRE 4 - 20MA; 16BIT, 15 MM WIDTH, FOR 4-WIRE TRANSDUCER, CYCLE TIME OF MODULE: 0.1MS, WITH LED SF (GROUP FAULT) |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Short-circuit protection | Yes |
| Reverse polarity protection | Yes |
| Input current |
| from load voltage L+ (without load), max. | 80 mA; without load |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Output voltage |
| Power supply to the transmitters |
| present | Yes |
| short-circuit proof | Yes |
| Encoder supply |
| Number of outputs | 2 |
| Output voltage | 24 V |
| Output current, rated value | 90 mA; Per channel |
| Output current, permissible range | 0 to 90 mA |
| Output current |
| Short-circuit protection | Yes |
| Power losses |
| Power loss, typ. | 1.9 W |
| Address area |
| Address space per module |
| Address space per module, max. | 4 byte |
| Analog inputs |
| Number of analog inputs | 2 |
| Cycle time (all channels) max. | 250 µs |
| permissible input current for current input (destruction limit), max. | 30 mA |
| Input ranges |
| Voltage | No |
| Current | Yes |
| Thermocouple | No |
| Resistance thermometer | No |
| Resistance | No |
| Input ranges (rated values), currents |
| 0 to 20 mA | Yes |
| Input resistance (0 to 20 mA) | 106 Ω |
| -20 to +20 mA | Yes |
| 4 to 20 mA | Yes |
| Cable length |
| Cable length, shielded, max. | 200 m |
| Analog value creation |
| Integrations and conversion time/ resolution per channel |
| Resolution with overrange (bit including sign), max. | 16 bit |
| Smoothing of measured values |
| Parameterizable | Yes |
| Step: None | Yes; 1 x cycle time |
| Step: low | Yes; 4 x cycle time |
| Step: Medium | Yes; 16 x cycle time |
| Step: High | Yes; 32 x cycle time |
| Encoder |
| Connection of signal encoders |
| for current measurement as 2-wire transducer | No |
| Errors/accuracies |
| Linearity error (relative to input area) | +/- 0,03 % |
| Temperature error (relative to input area) | +/- 0,01 %/K |
| Crosstalk between the inputs, min. | -50 dB |
| Repeat accuracy in settled status at 25 °C (relative to input area) | +/- 0,1 % |
| Operational limit in overall temperature range |
| Current, relative to input area | +/- 0,3 % |
| Basic error limit (operational limit at 25 °C) |
| Current, relative to input area | +/- 0,2 % |
| Isochronous mode |
| Isochronous mode | Yes |
| Interrupts/diagnostics/status information |
| Alarms |
| Hardware interrupt | Yes |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Wire break | Yes; Only with measuring range 4 to 20 mA |
| Group error | Yes |
| Overflow/underflow | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Parameter |
| Diagnosis: wire break | At 4 to 20 mA |
| Measurement type/range | 4 to 20 mA, 0 to 20 mA, +/-20 mA |
| Group diagnostics | Yes |
| Overflow/underflow | Yes |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| between the channels and the load voltage L+ | Yes |
| Permissible potential difference |
| between MANA and M internally (UISO) | 75 V DC, 60 V AC |
| Dimensions |
| Width | 15 mm |
| Module width, max. | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 45 g |
| Status | Sep 14, 2011 |
