| SIMATIC DP, 1 ELECTRON. MODULE FOR ET 200S, 8 DO HIGH FEATURE DC24V/0,5A, 15 MM WIDTH, DIAGNOSIS SHORT CIRCUIT, SF-LED 1 PIECES PER PACKAGING UNIT |
| Supply voltage |
| Reverse voltage protection | Yes; when using the same load voltage as on the power module |
| Load voltage L+ |
| Rated value (DC) | 24 V; From power module |
| Reverse polarity protection | Yes; polarity reversal can lead to the digital outputs being connected through |
| Input current |
| from load voltage L+ (without load), max. | 5 mA; Per channel |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Address area |
| Address space per module |
| with packing | Not relevant |
| without packing | 1 byte |
| Digital inputs |
| Cable length |
| Cable length, shielded, max. | 1000 m |
| Cable length unshielded, max. | 600 m |
| Digital outputs |
| Number/binary outputs | 8 |
| Functionality/short-circuit strength | Yes; Per channel |
| Response threshold, typ. | 0.7 to 1.9 A |
| Limitation of inductive shutdown voltage to | L+ -(47 to 60 V) |
| Lamp load, max. | 5 W |
| Controlling a digital input | Yes |
| Output voltage |
| for signal "1", min. | L+ (-1.0 V) |
| Output current |
| for signal "1" rated value | 0.5 A |
| for signal "1" permissible range for 0 to 60 °C, min. | 7 mA |
| for signal "1" permissible range for 0 to 60 °C, max. | 600 mA |
| for signal "0" residual current, max. | 0.3 mA |
| Output delay with resistive load |
| 0 to "1", max. | 300 µs |
| 1 to "0", max. | 600 µs |
| Parallel switching of 2 outputs |
| for increased power | No |
| for redundant control of a load | Yes; per module |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 2 Hz |
| on lamp load, max. | 10 Hz |
| Aggregate current of outputs (per group) |
| horizontal installation |
| up to 60 °C, max. | 4 A |
| vertical installation |
| up to 40 °C, max. | 4 A; At 55 °C and 24 V DC |
| Load resistance range |
| lower limit | 48 Ω |
| upper limit | 3400 Ω |
| Cable length |
| Cable length, shielded, max. | 1000 m |
| Cable length unshielded, max. | 600 m |
| Isochronous mode |
| Isochronous mode | Yes |
| Interrupts/diagnostics/status information |
| Diagnoses |
| Diagnostic functions | Yes |
| Short circuit | Yes; Module-wise |
| Diagnostics indication LED |
| Group error SF (red) | Yes; SF-LED (red) |
| Status indicator digital output (green) | Yes; Per channel |
| Parameter |
| Remark | 1 byte |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| Isolation |
| Isolation checked with | 500 V DC |
| Dimensions |
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 40 g |
