|
|
6ES7132-4BD02-0AA0 ET200S, EL-MOD., 4DO ST,DC24V, 0.5A,5PCS
- Weight:
- 0.04kg
Product Information| SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DO STANDARD DC 24V/0.5A, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT | | Supply voltage | | Reverse voltage protection | Yes; when using the same load voltage as on the power module | | Load voltage L+ | | Rated value (DC) | 24 V; from PM | | Reverse polarity protection | Yes; polarity reversal can lead to the digital outputs being connected through | | Input current | | from load voltage L+ (without load), max. | 10 mA; Per channel | | from backplane bus 3.3 V DC, max. | 10 mA | | Power losses | | Power loss, typ. | 0.8 W | | Address area | | Address space per module | | with packing | 4 bit | | without packing | 1 byte | | Digital outputs | | Number/binary outputs | 4 | | Functionality/short-circuit strength | Yes; per channel | | Response threshold, typ. | 1 to 1.5 A | | Limitation of inductive shutdown voltage to | (L+) -55 to -60 V | | Lamp load, max. | 5 W | | Controlling a digital input | Yes | | Output voltage | | for signal "1", min. | L+ (-1 V) | | Output current | | for signal "1" rated value | 0.5 A | | for signal "1" permissible range for 0 to 60 °C, min. | 7 mA | | for signal "1" permissible range for 0 to 60 °C, max. | 600 mA | | for signal "0" residual current, max. | 0.3 mA | | Output delay with resistive load | | 0 to "1", max. | 45 µs; Typical value | | 1 to "0", max. | 90 µs; Typical value | | Parallel switching of 2 outputs | | for increased power | No | | for redundant control of a load | Yes; per module | | Switching frequency | | with resistive load, max. | 800 Hz | | with inductive load, max. | 2 Hz | | on lamp load, max. | 10 Hz | | Aggregate current of outputs (per group) | | all mounting positions | | up to 60 °C, max. | 2 A | | Load resistance range | | lower limit | 48 Ω | | upper limit | 3400 Ω | | Cable length | | Cable length, shielded, max. | 1000 m | | Cable length unshielded, max. | 600 m | | Isochronous mode | | Isochronous mode | Yes | | Interrupts/diagnostics/status information | | Diagnoses | | Diagnostic functions | No | | Diagnostics indication LED | | Status indicator digital output (green) | Yes | | Parameter | | Remark | 1 byte | | Galvanic isolation | | Galvanic isolation digital outputs | | between the channels | No | | between the channels and the backplane bus | Yes | | Isolation | | Isolation checked with | 500 V DC | | Dimensions | | Width | 15 mm | | Height | 81 mm | | Depth | 52 mm | | Weight | | Weight, approx. | 40 g |
Target Price
Offer your acceptable price, and we may make you satisfied.Your Target Price
|
