| SIPLUS S7 MEC EC31-RTX FOR MEDIAL STRESS WITH CONFORMAL COATING (LEVEL 1 BASED ON 6ES7677-1DD00-0BB0 |
| General information |
| Hardware product version | 04 |
| Firmware version | V1.3 |
| PC configuration |
| Computer platform | SIMATIC S7 modular embedded controller |
| Processor selection | Intel Core Duo 1.2 GHz |
| Main memory | 1 GB RAM |
| Flash Disk | 2 GB |
| Operating systems | Windows XP embedded SP2 FP2007 |
| Installed software |
| Control | SIMATIC WinAC RTX 2009 |
| Communication | Yes |
| Supply voltage |
| Rated value, 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Mains buffering |
| Mains/voltage failure stored energy time | 5 ms |
| Input current |
| Rated value at 24 V DC | 800 mA; without backplane bus and USB power supply |
| Power losses |
| Power loss, typ. | 34 W |
| Memory |
| Memory type | 512 KB non-volatile memory for retentive data |
| CPU processing times |
| for bit operations, min. | 0.0040 µs; typ. |
| for fixed point arithmetic, min. | 0.0030 µs; typ. |
| for floating point arithmetic, min. | 0.0040 µs; typ. |
| CPU-blocks |
| DB |
| Number, max. | Max. code size and max. data size: 4 MB each |
| Size, max. | 64 Kibyte |
| FB |
| Number, max. | Max. code size and max. data size: 4 MB each |
| Size, max. | 64 Kibyte |
| FC |
| Number, max. | Max. code size and max. data size: 4 MB each |
| Size, max. | 64 Kibyte |
| OB |
| Number, max. | Max. code size and max. data size: 4 MB each |
| Size, max. | 64 Kibyte |
| Number of free cycle OBs | 1; OB 1 |
| Number of time alarm OBs | 1; OB 10 |
| Number of delay alarm OBs | 1; OB 20 |
| Number of time interrupt OBs | 9; OB 30-38 |
| Number of process alarm OBs | 1; OB 40 |
| Number of startup OBs | 2; OB 100, 102 |
| Number of asynchronous error OBs | 7; OB 80, 82-85, 86, 88 |
| Number of synchronous error OBs | 2; OB 121, 122 |
| Nesting depth |
| per priority class | 24 |
| additional within an error OB | 24 |
| Counters, timers and their retentivity |
| S7 counter |
| Number | 2,048 |
| Retentivity |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 2,047 |
| preset | 8 |
| Counting range |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 999 |
| IEC counter |
| present | Yes |
| Type | SFB |
| S7 times |
| Number | 2,048 |
| Retentivity |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 2,047 |
| Time range |
| lower limit | 10 ms |
| upper limit | 9,990 s |
| IEC timer |
| present | Yes |
| Type | SFB |
| Data areas and their retentivity |
| retentive data area, total | 512 KB |
| Flag |
| Number, max. | 16 Kibyte |
| of which retentive without battery | MB 0 to MB 16383 |
| Retentivity preset | MB 0 to MB 15 |
| Number of clock memories | 8 |
| Data blocks |
| Number, max. | Max. code size and max. data size: 4 MB each |
| Size, max. | 64 Kibyte |
| Address area |
| I/O address area |
| Inputs | 16 Kibyte |
| Outputs | 16 Kibyte |
| of which, distributed |
| Inputs | 8 Kibyte |
| Outputs | 8 Kibyte |
| Process image |
| Inputs, adjustable | 16 Kibyte |
| Outputs, adjustable | 16 Kibyte |
| Inputs, default | 512 byte |
| Outputs, default | 512 byte |
| Subprocess images |
| Number of subprocess images, max. | 15 |
| Digital channels |
| Inputs | 128,000 |
| Outputs | 128,000 |
| Analog channels |
| Inputs | 8,000 |
| Outputs | 8,000 |
| Time of day |
| Clock |
| Hardware clock (real-time clock) | Yes; Resolution: 1 s |
| Clock synchronization |
| supported | Yes |
| to PC-CP, slave | Yes |
| on Ethernet via NTP | Yes |
| 1st interface |
| Type of interface | PROFINET |
| Physics | 2x RJ45 |
| Automatic detection of transmission speed | Yes |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| Number of connection resources | 32 |
| Functionality |
| MPI | No |
| DP master | No |
| DP slave | No |
| PROFINET IO Device | No |
| PROFINET IO Controller | Yes |
| PROFINET CBA | Yes |
| Open IE communication | Yes |
| Point-to-point connection | No |
| PROFINET IO Controller |
| Services |
| PG/OP communication | Yes |
| S7 routing | Yes |
| S7 communication | Yes |
| Isochronous mode | No |
| Number of connectable IO devices, max. | 256 |
| Number of IO devices with IRT and the option "high flexibility" | 64 |
| IRT, supported | Yes |
| Prioritized startup supported | Yes |
| Number of IO Devices, max. | 32 |
| Activation/deactivation of IO Devices | Yes |
| Number of IO Devices that can be simultaneously activated/deactivated, max. | 8 |
| IO Devices changing during operation (partner ports), supported | Yes |
| Max. number of IO devices per tool | 8 |
| Send cycles | Adjustable: 250 µs, 500 µs and 1 ms |
| Updating times | 250 µs - 128 ms (with signal cycle 250 µs); 500 µs - 256 ms (with signal cycle 500 µs); 1 ms - 512 ms (with signal cycle 1 ms) |
| Address area |
| Inputs, max. | 16 Kibyte |
| Outputs, max. | 16 Kibyte |
| User data per address area, max. | 2 Kibyte |
| User data consistency, max. | 256 byte |
| PROFINET CBA |
| acyclic transmission | Yes |
| Cyclic transmission | Yes |
| Open IE communication |
| Open IE communication, supported | Yes |
| Number of connections, max. | 32 |
| Local port numbers used at the system end | 0, 20, 21, 23, 25, 80, 102, 135, 161, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| PROFINET functions |
| Detection of accessible nodes, supported | Yes; DCP |
| Assignment of the IP address, supported | Yes; DCP |
| Assignment of the device name, supported | Yes; DCP |
| Topology recognition, supported | Yes; LLDP, LLDP MIB, SNMP |
| Extended network diagnostics with Standard MIB II, supported | Yes; Standard MIB II, SNMP |
| 2nd interface |
| Type of interface | Integrated Ethernet interface |
| Physics | Ethernet RJ45 |
| Automatic detection of transmission speed | Yes |
| Autonegotiation | Yes |
| Autocrossing | No |
| Number of connection resources | 32 |
| Functionality |
| PROFINET IO Controller | No |
| PROFINET IO Device | No |
| PROFINET CBA | No |
| Communication functions |
| PG/OP communication | Yes |
| Global data communication |
| supported | No |
| S7 basic communication |
| supported | No |
| S7 communication |
| supported | Yes |
| as server | Yes |
| as client | Yes |
| Open IE communication |
| TCP/IP | Yes; Via integrated PROFINET interface (X1) and loadable FBs |
| Number of connections, max. | 32 |
| Data length, max. | 8,192 byte |
| ISO-on-TCP (RFC1006) | No |
| UDP | Yes; Via integrated PROFINET interface (X1) and loadable FBs |
| Number of connections, max. | 32 |
| Data length, max. | 1,472 byte |
| Number of connections |
| overall | 64 |
| usable for PG communication | |
| reserved for PG communication | 1 |
| usable for OP communication | |
| reserved for OP communication | 1 |
| S7 message functions |
| Number of login stations for message functions, max. | 62; The alarm functions cannot currently be used for central bus modules |
| Process diagnostic messages | Yes; Alarm_S |
| Test commissioning functions |
| Status/control |
| Status/control variable | Yes |
| Forcing |
| Forcing | No |
| Diagnostic buffer |
| present | Yes |
| EMC |
| Emission of radio interference acc. to EN 55 011 |
| Limit class A, for use in industrial areas | Yes |
| Ambient conditions |
| Operating temperature |
| Min. | 0 °C |
| max. | 50 °C |
| Storage/transport temperature |
| Min. | -40 °C |
| max. | 70 °C |
| Vibrations |
| Operation, checked according to IEC 60068-2-6 | Yes |
| Transport tested checked to IEC 60068-2-6 | Yes |
| Shock test |
| checked according to IEC 60068-2-27 | Yes |
| checked according to IEC 60068-2-29 | Yes |
| Shock testing |
| checked according to IEC 60068-2-29 | Yes |
| Operation, checked according to IEC 60068-2-29 | Operation, tested according to IEC 60068-2-27 |
| Storage/transport, checked to IEC 60068-2-29 | Yes |
| Degree and class of protection |
| IP20 | Yes |
| Standards, approvals, certificates |
| CE mark | Yes |
| CSA approval | No |
| cULus | No |
| C-TICK | No |
| FM approval | No |
| Configuration |
| Configuration software |
| STEP 7 | Yes |
| programming |
| Programming language |
| LAD | Yes |
| FBD | Yes |
| STL | Yes |
| SCL | Yes |
| CFC | Yes |
| GRAPH | Yes |
| HiGraph® | Yes |
| Dimensions |
| Width | 160 mm |
| Height | 125 mm |
| Depth | 115 mm |
| [nicht versorgt: TAK_ABV654_001_000] |
| [nicht versorgt: TAK_ABV463_001_000] |
| Product version |
| STEP 7 | Yes; V5.4 SP4 and higher + HW update/iMap V3.0 SP1 |
