6AG1131-4BF50-7AA0 SIPLUS ET200S EM 8 DI DC24V

The actual product may differ from image shown

Product Information

SIPLUS ET200S EM 8 DI DC24V -40 ... +70 DEGREES C BASED ON 6ES7131-4BF50-0AA0
Supply voltage
24 V DC	Yes; From power module
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Input current
from supply voltage L+, max.	Dependent on encoder
Power losses
Power loss, typ.	1.2 W
Digital inputs
Number/binary inputs	8
Input characteristic curve acc. to IEC 1131, Type 1	Yes
Input voltage
Type of input voltage	DC
Rated value, DC	24 V
for signal "0"	30 to -5 V
for signal "1"	-15 to -30 V
Input current
for signal "1", typ.	6 mA; at 24 V
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable	No
at "0" to "1", min.	2 ms
at "0" to "1", max.	4.5 ms
at "1" to "0", min.	2 ms
at "1" to "0", max.	4.5 ms
Cable length
Cable length, shielded, max.	1,000 m
Cable length unshielded, max.	600 m
Encoder
Connectable encoders
2-wire BEROS	Yes
permissible quiescent current (2-wire BEROS), max.	1.5 mA
Isochronous mode
Isochronous mode	Yes
Interrupts/diagnostics/status information
Diagnoses
Diagnostic functions	No
Diagnostics indication LED
Group error SF (red)	No
Status indicator digital input (green)	Yes; per channel
Parameter
Remark	3 bytes
Galvanic isolation
Galvanic isolation digital inputs
between the channels	No
between the channels and the backplane bus	Yes
Permissible potential difference
between different circuits	75 VDC / 60 VAC
Isolation
Isolation checked with	500 V DC
Dimensions
Width	15 mm
Height	81 mm
Depth	52 mm
Weight
Weight, approx.	35 g

Offer your acceptable price, and we may make you satisfied.Your Target Price