| OVERLOAD RELAY, 0.14...0.2 A, 1NO+1NC, SIZE S00, CLASS 10, FOR CONTACTOR MOUNTING |
| General technical details: |
| Product brand name | | SIRIUS |
| product designation | | thermal overload relay |
| Protection class IP / on the front | | IP20 |
| Insulation voltage / with degree of pollution 3 / rated value | V | 690 |
| Installation altitude / at a height over sea level / maximum | m | 2,000 |
| Ambient temperature | | |
| °C | -20…70 |
| °C | -55…80 |
| °C | -55…80 |
| Relative humidity / during operating phase / maximum | % | 100 |
| Resistance against shock | | 8g / 10 ms |
| Impulse voltage resistance / rated value | kV | 6 |
| Active power loss / total / typical | W | 6.6 |
| Item designation | | |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | F |
- according to DIN EN 61346-2
| | F |
| Operating current / of the fuse link / rated value | A | 1 |
| Trip class | | CLASS 10 |
| Type of assignement | | 2 |
| type of protection | | DMT 98 ATEX G 001 |
| Size of overload relay | | S00 |
| Size of the contactor / can be combined / company-specific | | S00 |
|
| Main circuit: |
| Number of poles / for main current circuit | | 3 |
| Operating voltage / at AC-3 / rated value | | |
| V | 690 |
| Service power / at AC-3 | | |
| kW | 0.06 |
| Adjustable response current | | |
- of the current-dependent overload release
| A | 0.14…0.2 |
| Auxiliary circuit: |
| Contact reliability / of the auxiliary contacts | | acceptability for PLC control (17 V, 5 mA) |
| Number of NC contacts | | 1 |
| Number of NO contacts | | 1 |
| Number of change-over switches | | 0 |
| Operating current / of the auxiliary contacts / at AC-15 | | |
| A | 3 |
| A | 3 |
| A | 3 |
| A | 3 |
| A | 2 |
| A | 1 |
| Operating current / of the auxiliary contacts / at DC-13 | | |
| A | 1 |
| A | 0.22 |
| A | 0.22 |
| A | 0.11 |
| Short-circuit: |
| Design of the fuse link / for short-circuit protection of the auxiliary switch / required | | fuse gL/gG: 6 A, quick: 10 A |
| Installation/mounting/dimensions: |
| Built in orientation | | with vertical mounting surface +/-135° rotatable, with vertical mounting surface +/- 45° tiltable to the front and back |
| Type of mounting | | direct mounting |
| Height | mm | 87 |
| Width | mm | 45 |
| Depth | mm | 78 |
| Distance, to be maintained, to the ranks assembly | | |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| Distance, to be maintained, to earthed part | | |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 6 |
| Distance, to be maintained, conductive elements | | |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 6 |
| Connection type: |
| Product function | | |
- removable terminal for auxiliary and control circuit
| | No |
| Design of the electrical connection | | |
| | screw-type terminals |
- for auxiliary and control current circuit
| | screw-type terminals |
| Type of the connectable conductor cross-section | | |
| | |
| | 2 x (0.5 ... 1.5 mm²), 2 x (0.75 ... 2.5 mm²), max. 2 x (1 ... 4 mm²) |
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (1 ... 4 mm²) |
| | |
- with conductor end processing
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| | |
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| | |
- with conductor end processing
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
- without conductor final cutting
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| | |
| | 2x (18 ... 14) |
| | 2x (18 ... 14) |
| Conductor cross section that can be connected | | |
| | |
| mm² | 0.5…4 |
| mm² | 0.5…4 |
| | |
- with conductor end processing
| mm² | 0.5…2.5 |
| | |
| mm² | 0.5…2.5 |
| | |
- with conductor end processing
| mm² | 0.5…2.5 |
- without conductor final cutting
| mm² | 0.5…2.5 |
| AWG number / as coded connectable conductor cross-section | | |
- for main contacts / minimum
| | 18 |
| | 18…14 |
| Verification of suitability | | CSA / UL / CC / GL / LRS / BV / DNV / RMRS / RINA / PRS / ABS |
| Varification of suitability / ATEX | | Yes |
