| ACTUATOR SENSOR INTERFACE 2I/20R APPLICATION MODULE 2X1 INPUT 100MA PNP OUTPUT RELAY DC 24V, 1A EXTERNAL VOLTAGE SUPPLY VIA M12 4X M12 SOCKETS, EMI |
| Allgemeine technische Daten: |
| Design of the product | | digital I/O modules for operation in the field, IP67 - user modules |
| Design of the slave type | | standard slave |
| Type | | 2 inputs / 2 outputs |
| I/O configuration | | 3 |
| ID code | | 0 |
| Number / I/O sockets | | 4 |
| Protocol / will be supported / AS interface protocol | | Yes |
| Design of the electrical connection | | |
- of the inputs and outputs
| | M12 screw-type terminals |
| AS interface / total current input / max | mA | 140 |
| operating voltage | | |
- according to AS-Interface spezification
| V | 26.5…31.6 |
| Note 1 | | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits. The additional supply must comply with VDE 0106 (PELV), protection class III. |
| Note 2 | | During a communication failure the relay outputs remain in the current switching state |
| Item designation | | |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | A |
- according to DIN EN 61346-2
| | K |
| Eingänge: |
| Number of digital inputs | | 2 |
| Input circuit | | PNP |
| Type of voltage | | |
| | DC |
| Input voltage | V | 20…30 |
| Inputs / switching level High | | |
| V | 10 |
| Input current / at the digital input | | |
| mA | 5 |
| mA | 1.5 |
| Inputs | | |
- sensor supply using AS-Interface
| | short-circuit and overload resistant |
| Ausgänge: |
| Number of digital outputs | | 2 |
| Type of voltage | | |
| | DC |
| Outputs | | |
- external power supply 24 V DC
| | using M12 connector |
| Output voltage / at 24 V | | |
| V | 24…24 |
| Output current / at the digital output / for signal <1> | | |
| A | 1 |
| Outputs / aggregate current | | |
| A | 2 |
| Design of the switching output | | relay |
| Characteristic feature of the output | | |
| | Yes |
| Outputs | | |
| | built-in |
| | built-in |
- current carrying capacity DC-12/13
| | 1 A (12 V DC), 0.5 A (DC-13 24 V) |
| Status display |
| | yellow LED |
- display of AS-Interface/diagnostics
| | green LED |
| Assignment of data bits |
| | input (D0) |
| | input (D1) |
| | output (D2) |
| | output (D3) |
| Umgebungsbedingungen: |
| Ambient temperature | | |
| °C | -40…85 |
| °C | -25…85 |
| Protection class IP | | IP67 |
| Mechanischer Aufbau: |
| Width | mm | 45 |
| Height | mm | 90 |
| Depth | mm | 27 |
| Type of mounting | | standard rail mounting/wall mounting using coupling module |
| connection | | using contact pins on FK or Pg coupling module |
| type of the connection technology | | 2 and 3-conductor technology |
| Approbationen/ Zertifikate: |
| AS-Interface certificate | | yes |
| Approvals | | UL, CSA, shipbuilding |
| Weitere Informationen: |
| Information- and Downloadcenter (Kataloge, Broschüren,…) |
| Industry Mall (Online-Bestellsystem) |
| Service&Support (Handbücher, Betriebsanleitungen, Zertifikate, Kennlinien, FAQs,…) |
| Bilddatenbank (Produktfotos, 2D-Maßzeichnungen, 3D-Modelle, Geräteschaltpläne, …) |
