| AS-INTERFACE SLIMLINE MOD. S45, DIGITAL, 4I/4O, 2/3-WIRE, IP20 4 X 1 INPUT, 200MA, PNP 4 X 1 OUTPUT, 2A, DC 24V SCREW-TYPE TERMINAL CONNECT. MODULE WIDTH 45 MM |
| General technical data: |
| Design of the product | | SlimLine S22.5 - I/O modules for operation in the control cabinet |
| Design of the slave type | | standard slave |
| Type | | 4 inputs / 4 outputs |
| I/O configuration | | 7 |
| ID/ID2 code | | 0/F |
| Protocol / will be supported / AS interface protocol | | Yes |
| AS interface / total current input / max | mA | 270 |
| operating voltage | | |
- according to AS-Interface spezification
| V | 26.5…31.6 |
| Addressing | | front addressing socket |
| Design of the electrical connection / of the inputs and outputs | | screw-type terminals |
| Item designation | | |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | A |
- according to DIN EN 61346-2
| | K |
| note | | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III. |
| Sensor supply: |
| Type of voltage supply / for the sensor supply | | using AS-Interface |
| Input voltage | V | 20…30 |
| Characteristic feature of the sensor supply / short-circuit and overload resistant | | Yes |
| Current carrying capacity / of the sensor supply / for all inputs | | |
- at ambient temperature 40 °C
| mA | 200 |
| Inputs: |
| Number of digital inputs | | 4 |
| type of the connection technology | | 2 and 3-conductor technology |
| Input circuit | | PNP transistor |
| Type of voltage / of the input voltage | | DC |
| Inputs / switching level High / min | V | 10 |
| Input current / at the digital input | | |
| mA | 5 |
| mA | 1.5 |
| Inputs / sensor supply using AS-Interface | | short-circuit and overload resistant |
| Outputs: |
| Number of digital outputs | | 4 |
| Type of voltage / of the outputs | | DC |
| Output voltage / at 24 V | | |
| V | 22…24 |
| Outputs / external power supply 24 V DC | | using terminals: Terminal 13 = L+, Terminal 19 = M |
| Outputs | | |
| A | 4 |
| Current-carrying capacity | | |
- of the semiconductor output / at DC-13 / at 24 V
| A | 2 |
| Design of the switching output | | solid state |
| Characteristic feature of the output / short-circuit protected | | Yes |
| output / Polarity reversal protection | | built-in |
| Outputs | | |
| | built-in |
| | built-in |
| | built-in |
| Status display |
| | yellow LED |
| | green LED |
| | red LED |
| Assignment of data bits |
| | IN1/OUT1 |
| | IN2 /OUT2 |
| | IN3/OUT3 |
| | IN4/OUT4 |
| Ambient conditions: |
| Ambient temperature | | |
| °C | -25…70 |
| °C | -40…85 |
| Protection class IP | | IP20 |
| Mechanical design: |
| Width | mm | 45 |
| Height | mm | 106 |
| Depth | mm | 86 |
| Type of mounting | | 35 mm standard rail mounting or wall mounting using push-in lugs |
| Conductor cross-section | | |
| | 1 x (0.5 - 4) mm² or 2 x (0.5 - 2.5) mm² |
| | |
| | 1 x (0.5 - 2.5) mm² or 2 x (0.5 - 1.5) mm² |
| | AWG 2 x (20 - 14) mm² |
| AS-Interface certificate | | yes (or requested for in case of new units) |
| Approvals | | UL, CSA, shipbuilding (or requested for in case of new units) |
