SIMATIC S7-200, DIGITAL OUTPUT EM 222, FOR S7-22X CPU ONLY, 4DO (RELAY); 10 A, 5 - 30V DCOR 5 - 250V AC |
Supply voltage |
Load voltage L+ |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 12 V |
permissible range, upper limit (DC) | 30 V |
Load voltage L1 |
Rated value (AC) | 24 V; 24 to 230 V AC |
permissible range, lower limit (AC) | 12 V |
permissible range, upper limit (AC) | 250 V |
Input current |
from backplane bus 5 V DC, max. | 30 mA |
Digital outputs |
from load voltage L+, max. | 80 mA; 20 mA per switched output |
Power losses |
Power loss, typ. | 4 W |
Digital outputs |
Number/binary outputs | 4; Relay |
Functionality/short-circuit strength | No; to be provided externally (see manual package "Setting up an S7-200") |
Limitation of inductive shutdown voltage to | to be provided externally (see manual package "Setting up an S7-200") |
Output current |
for signal "1" permissible range for 0 to 40 °C, max. | 10 A |
for signal "1" permissible range for 0 to 55 °C, max. | 10 A |
for signal "0" residual current, max. | 0 mA |
Aggregate current of outputs (per group) |
Digital inputs / Number of inputs that can be driven in parallel / all mounting positions |
up to 40 °C, max. | 40 A |
maximum current per conductor/group | 10 A |
horizontal installation |
up to 55 °C, max. | 20 A |
Relay outputs |
Number of operating cycles | 30000000; mechanically 30 million, at rated load voltage 30,000 |
Switching capacity of contacts |
with inductive load, max. | 3 A; 2 A (DC), 3 A (AC) |
on lamp load, max. | 1000 W; 100/1000 W (DC/AC) |
Switching frequency/contacts/at ohmic load/maximum | 10 A |
Cable length |
Cable length, shielded, max. | 500 m |
Cable length unshielded, max. | 150 m |
Galvanic isolation |
Galvanic isolation digital outputs |
Galvanic isolation digital outputs | Yes; Relay |
between the channels, in groups of | 1; 4 groups |
Connection method |
Plug-in I/O terminals | Yes |
Dimensions |
Width | 45 mm |
Height | 80 mm |
Depth | 62 mm |
Weight |
Weight, approx. | 150 g |