6ES7151-1CA00-0AB0 SIMATIC DP, INTERFACE MODULE

The actual product may differ from image shown

Product Information

SIMATIC DP, INTERFACE MODULE IM151-1 BASIC FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; MAX. OF 12 POWER, ELECTR. OR MOTOR STARTER MODULES (NO F-MODULES) CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D CONN. INCL. TERMINATING MODULE
General information
Vendor identification (VendorID)	80F3h
Supply voltage
Mains buffering
Mains buffering, min.	No
Input current
from supply voltage 1L+, max.	70 mA
Power losses
Power loss, typ.	1.5 W
Address area
Addressing volume
Outputs	88 byte
Inputs	88 byte
Interfaces
Interface physics, RS 485	Yes; 9-pin sub D socket
PROFIBUS DP
PROFIBUS DP, output current, max.	80 mA
Transmission rate, max.	12 Mbit/s; 9.6 / 19.2 / 45.45 / 93.75 / 187.5 / 500 Kbit/s; 1.5 / 3 / 6 / 12 Mbit/s
SYNC capability	Yes
FREECE capability	Yes
Direct data exchange (slave-to-slave communication)	Yes
Protocols
Further protocols
PROFIBUS DP protocol	Yes
Isochronous mode
Isochronous mode	No
Interrupts/diagnostics/status information
Alarms
Alarms	No
Diagnoses
Diagnostic functions	Yes
Diagnostics indication LED
Bus fault BF (red)	Yes
Group error SF (red)	Yes
Monitoring 24 V voltage supply ON (green)	Yes
Galvanic isolation
between backplane bus and electronics	No
between electronic block and PROFIBUS DP	Yes
between supply voltage and electronics	No
Permissible potential difference
between different circuits	75 VDC / 60 VAC
Isolation
Isolation checked with	500 V DC
Dimensions
Width	45 mm
Height	119.5 mm
Depth	75 mm
Weight
Weight, approx.	150 g
Status	Sep 16, 2011

Offer your acceptable price, and we may make you satisfied.Your Target Price

The actual product may differ from image shown