| SIMATIC DP, ET 200ECO PN, IO-LINK MASTER, 4IO-L + 8DI + 4DO 24V DC/1.3A 8 X M12, DOUBLE-ASSIGNEMENT, DEGREE OF PROTECTION IP67 |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0306H |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Load voltage 2L+ |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current |
| from load voltage 1L+ (unswitched voltage) | 4 A |
| from load voltage 2L+, max. | 4 A |
| Encoder supply |
| Number of outputs | 6 |
| Output current, rated value | 200 mA; 100 mA per output to X5-X6 |
| 24 V encoder supply |
| Short-circuit protection | Yes |
| Power losses |
| Power loss, typ. | 8 W |
| Digital inputs |
| Number/binary inputs | 8 |
| Input characteristic curve acc. to IEC 1131, Type 3 | Yes |
| Number of simultaneously controllable inputs |
| all mounting positions |
| up to 60 °C, max. | 8 |
| Input voltage |
| Type of voltage / of the input voltage | |
| Rated value, DC | 24 V |
| for signal "0" | -3 to +5 V |
| for signal "1" | 11 to 30 V |
| Input current |
| for signal "0", max. (permissible quiescent current) | 1.5 mA |
| for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| at "0" to "1", max. | typically 3 ms |
| at "1" to "0", max. | typically 3 ms |
| Cable length |
| Cable length unshielded, max. | 30 m |
| Digital outputs |
| Number/binary outputs | 4 |
| Functionality/short-circuit strength | Yes; Electronic |
| Response threshold, typ. | 1.8 A |
| Limitation of inductive shutdown voltage to | Typ. (L1+, L2+) -47 V |
| Switching capacity of the outputs |
| on lamp load, max. | 5 W |
| Controlling a digital input | Yes |
| Output current |
| for signal "1" rated value | 1.3 A; Maximum |
| for signal "0" residual current, max. | 1.5 mA |
| Parallel switching of 2 outputs |
| for increased power | No |
| for redundant control of a load | Yes |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| on lamp load, max. | 1 Hz |
| Aggregate current of outputs (per group) |
| Digital inputs / Number of inputs that can be driven in parallel / all mounting positions |
| up to 60 °C, max. | 3.9 A |
| Cable length |
| Cable length unshielded, max. | 30 m |
| IO-Link |
| Number of ports | 4 |
| of which simultaneously controllable | 4 |
| Operating modes |
| IO-Link | Yes |
| DI | Yes |
| DO | Yes |
| Connection of IO-Link devices |
| via 3-wire connection | Yes |
| Transmission rate | 4.8 kBd (COM1); 38.4 kBd (COM2) |
| Cable length unshielded, max. | 20 m |
| Interfaces |
| Transmission procedure | 100BASE-TX |
| Transmission rate, max. | 100 Mbit/s |
| Supports protocol for PROFINET IO |
| Number of PROFINET interfaces | 2 |
| Autocrossing | Yes |
| Automatic detection of transmission speed | Yes |
| Integrated switch | Yes |
| PROFINET IO Device |
| IRT with the option "high flexibility" supported | Yes |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| Protocols (Ethernet) |
| SNMP | Yes |
| DCP | Yes |
| LLDP | Yes |
| ping | Yes |
| arp | Yes |
| Interrupts/diagnostics/status information |
| Status indicator | Yes; Green LED |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Monitoring the supply voltage to the electronics | Yes; Green "ON" LED |
| Wire break in actuator cable | Yes |
| Wire break in signal transmitter cable | Yes |
| Short circuit | Yes |
| Short circuit encoder supply | Yes |
| Group error | Yes; Red/yellow "SF/MT" LED |
| Galvanic isolation |
| between the load voltages | Yes |
| between load voltage and all other switching components | No |
| between Ethernet and electronics | Yes |
| Galvanic isolation digital inputs |
| between the channels | No |
| Galvanic isolation digital outputs |
| between the channels | No |
| Permissible potential difference |
| between different circuits | 75 VDC / 60 VAC |
| Isolation |
| tested with |
| 24 V DC circuits | 500 V |
| Interface | 1500 V; According to IEEE 802.3 |
| Degree and class of protection |
| IP65 | Yes |
| IP66 | Yes |
| IP67 | Yes |
| Connection method |
| M12 | Yes |
| Dimensions |
| Width | 60 mm |
| Height | 175 mm |
| Depth | 49 mm |
| Weight |
| Weight | 910 g |
