6ES7148-4EA00-0AA0 ET200PRO, 16DO,PNEUMATIC INTERFACE CPV10

The actual product may differ from image shown

Product Information

SIMATIC DP, PNEUMATIC INTERFACE FOR ET 200PRO 16 DO PNEUMATIC FOR COUPLING WITH FESTO VALVE BLOCK CPV-10 INCLUSIVE BUS MODULE
Supply voltage
Load voltage 2L+
Rated value (DC)	24 V
Short-circuit protection	Yes
Reverse polarity protection	Yes
Input current
from load voltage 2L+ (without load), max.	20 mA
from backplane bus 3.3 V DC, max.	25 mA
Power losses
Power loss, typ.	2.6 W
Address area
Address space per module
without packing	2 byte
Digital outputs
Number/binary outputs	16
Output current
for signal "1" rated value	12 mA
Switching frequency
with inductive load, max.	25 Hz
Aggregate current of outputs (per group)
Digital inputs / Number of inputs that can be driven in parallel / all mounting positions
up to 55 °C, max.	250 mA; only up to 50 °C, limited by valves
Load resistance range
lower limit	500 Ω
upper limit	2500 Ω
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes
Diagnoses
Diagnostic functions	Yes
Diagnostic information readable	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Status indicator digital output (green)	Yes
Parameter
Remark	Diagnosis load voltage 2L+
Behavior on CPU/Master STOP	No
Galvanic isolation
between backplane bus and all other circuit components	Yes
between the channels and backplane bus	Yes
Galvanic isolation digital outputs
between the channels and the backplane bus	Yes
Permissible potential difference
between different circuits	75 VDC / 60 VAC
Isolation
Isolation checked with	500 V DC
tested with
Load voltage L+ against backplane bus	500 V DC
Dimensions
Width	90 mm
Height	130 mm
Depth	47 mm

Offer your acceptable price, and we may make you satisfied.Your Target Price