| SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AO I HIGH FEATURE, +-20MA; 0...20MA; 4-20MA; CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes; against destruction |
| Input current |
| from backplane bus 3.3 V DC, max. | 10 mA |
| Address area |
| Address space per module |
| Address space per module, max. | 8 byte |
| Analog outputs |
| Number of analog outputs | 4 |
| Voltage output, short-circuit protection | Yes; per module, electronic to frame |
| Current output, no-load voltage, max. | 16 V |
| Cycle time (all channels) max. | 3 ms |
| Output ranges, current |
| 0 to 20 mA | Yes |
| -20 to +20 mA | Yes |
| 4 to 20 mA | Yes |
| Connection of actuators |
| for current output 2-conductor connection | Yes |
| for current output 4-conductor connection | Yes |
| Load impedance (in rated range of output) |
| with current outputs, max. | 600 Ω |
| with current outputs, inductive load, max. | 1 mH |
| Destruction limits against externally applied voltages and currents |
| Current, max. | 100 mA |
| [nicht versorgt: TAK_ABT299_001_000] |
| Cable length, shielded, max. | 30 m |
| Analog value creation |
| Integrations and conversion time/ resolution per channel |
| Resolution with overrange (bit including sign), max. | 15 bit; at +/- 20 mA; 14 bits at 0 to 20 mA; 15 bits at 4 to 20 mA |
| Conversion time (per channel) | 0.7 ms |
| Settling time |
| for resistive load | 0.1 ms |
| for inductive load | 1 ms |
| Errors/accuracies |
| Output ripple (based on output area, bandwidth 0 to 50 kHz) | +/- 0.02 % |
| Linearity error (relative to output area) | +/- 0.1 % |
| Temperature error (relative to output area) | +/- 0.01 % |
| Repeat accuracy in settled status at 25 °C (relative to output area) | +/- 0.05 % |
| Operational limit in overall temperature range |
| Current, relative to output area | +/- 0.2 % |
| Basic error limit (operational limit at 25 °C) |
| Current, relative to output area | +/- 0.15 % |
| Interrupts/diagnostics/status information |
| Substitute values connectable | Yes |
| Alarms |
| Diagnostic alarm | Yes; Parameterizable |
| Hardware interrupt | No |
| Diagnoses |
| Wire break | Yes; per channel, not in zero range |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Parameter |
| Output type/range | 1 |
| Diagnosis: wire break | 1 |
| Diagnosis: short circuit | Encoder supply to M |
| Group diagnostics | 1 |
| Behavior on CPU/Master STOP | 1 |
| Galvanic isolation |
| Galvanic isolation analog outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| Dimensions |
| Width | 45 mm |
| Height | 130 mm |
| Depth | 35 mm |
| Weight |
| Weight, approx. | 150 g |
