| SIMATIC DP, ET 200ECO PN, 8 DI 24V DC; 4 X M12, DOUBLE-ASSIGNEMENT, DEGREE OF PROTECTION IP67; |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0306H |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current |
| Current consumption, typ. | 100 mA |
| Encoder supply |
| Number of outputs | 4 |
| Output current, rated value | 100 mA; per output |
| 24 V encoder supply |
| Short-circuit protection | Yes |
| Power losses |
| Power loss, typ. | 5.5 W |
| Digital inputs |
| Number/binary inputs | 8 |
| In groups of | 2 |
| Input characteristic curve acc. to IEC 1131, Type 3 | Yes |
| Number of simultaneously controllable inputs |
| all mounting positions |
| up to 60 °C, max. | 8 |
| Input voltage |
| Type of input voltage | DC |
| Rated value, DC | 24 V |
| for signal "0" | -3 to +5 V |
| for signal "1" | 11 to 30 V |
| Input current |
| for signal "0", max. (permissible quiescent current) | 1.5 mA |
| for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| at "0" to "1", max. | typically 3 ms |
| at "1" to "0", max. | typically 3 ms |
| Cable length |
| Cable length unshielded, max. | 30 m |
| Interfaces |
| Transmission procedure | 100BASE-TX |
| Transmission rate, max. | 100 Mbit/s |
| Supports protocol for PROFINET IO |
| Number of PROFINET interfaces | 2 |
| Autocrossing | Yes |
| Automatic detection of transmission speed | Yes |
| Integrated switch | Yes |
| PROFINET IO Device |
| IRT with the option "high flexibility" supported | Yes |
| Prioritized startup supported | Yes |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| Protocols (Ethernet) |
| SNMP | Yes |
| DCP | Yes |
| LLDP | Yes |
| ping | Yes |
| arp | Yes |
| Interrupts/diagnostics/status information |
| Status indicator | Yes; Green LED |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Monitoring the supply voltage to the electronics | Yes; Green "ON" LED |
| Wire break in signal transmitter cable | Yes |
| Short circuit encoder supply | Yes; Per channel group |
| Group error | Yes; Red/yellow "SF/MT" LED |
| Galvanic isolation |
| between the load voltages | Yes |
| between load voltage and all other switching components | No |
| between Ethernet and electronics | Yes |
| Galvanic isolation digital inputs |
| between the channels | No |
| Permissible potential difference |
| between different circuits | 75 VDC / 60 VAC |
| Isolation |
| tested with |
| 24 V DC circuits | 500 V |
| Interface | 1500 V; According to IEEE 802.3 |
| Degree and class of protection |
| IP65 | Yes |
| IP66 | Yes |
| IP67 | Yes |
| Connection method |
| M12 | Yes |
| Dimensions |
| Width | 30 mm |
| Height | 200 mm |
| Depth | 49 mm |
| Weight |
| Weight | 550 g |
