| SIMATIC DP, POWER MODULE PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH GROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUS P2 UP TO CATEGORY 3 (EN954-1)/ SIL 2 (IEC61508) ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | No |
| Input current |
| from load voltage L+ (without load), max. | typ. 100 mA |
| from backplane bus 24 V DC, max. | 28 mA |
| Current carrying capacity |
| Current carrying capacity up to 30 °C, max. | 10 A |
| Current carrying capacity up to 40 °C, max. | 8 A |
| Current carrying capacity up to 60 °C, max. | 7 A |
| Power losses |
| Power loss, typ. | 4 W |
| Address area |
| Address space per module |
| without packing | 5 byte; Input and output in each case |
| Digital inputs |
| Cable length |
| Cable length, shielded, max. | 200 m |
| Cable length unshielded, max. | 200 m |
| Digital outputs |
| Number/binary outputs | 1; Relay |
| Functionality/short-circuit strength | No |
| Lamp load, max. | 100 W |
| Controlling a digital input | Yes |
| Switching frequency |
| with resistive load, max. | 2 Hz |
| with inductive load, max. | 0.1 Hz; with inductive load to IEC 947-5-1, 13 DC /15 AC |
| on lamp load, max. | 2 Hz |
| Relay outputs |
| Switching capacity of contacts |
| at ohmic load, up to 50 °C, max. | 10 A |
| Interrupts/diagnostics/status information |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Wire break | No |
| Short circuit | Yes |
| Missing load voltage | Yes |
| Diagnostics indication LED |
| Rated load voltage PWR (green) | Yes |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| between the channels and the load voltage L+ | No |
| Isolation |
| Isolation checked with | 500 V DC |
| tested with |
| Channels against backplane bus and load voltage L+ | 500 V DC |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| acc. to EN 954 | With Std-DO: max. Cat.3, without Std-DO max. Cat.4 depending on configuration |
| acc. to IEC 61508 | With Std-DO: Max. SIL 2, without Std-DO max. SIL 3 depending on configuration |
| Dimensions |
| Width | 30 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 80 g |
| Status | Sep 10, 2011 |
