| SIMATIC DP, POWER MODULE PM-E F PROFISAFE, FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CAT. 3/ SIL 2 AND 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CAT. 4/ SIL 3, ALSO USEABLE IN PROFINET-NETWORKS |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | No |
| Input current |
| from load voltage L+ (without load), max. | typ. 100 mA |
| from backplane bus 24 V DC, max. | 28 mA |
| Current carrying capacity |
| Current carrying capacity up to 40 °C, max. | 10 A |
| Current carrying capacity up to 60 °C, max. | 6 A |
| Power losses |
| Power loss, typ. | 4 W |
| Address area |
| Address space per module |
| without packing | 5 byte; Input and output in each case |
| Digital inputs |
| Cable length |
| Cable length, shielded, max. | 200 m |
| Cable length unshielded, max. | 200 m |
| Digital outputs |
| Number/binary outputs | 2 |
| Functionality/short-circuit strength | Yes; Electronic |
| Response threshold, typ. | Response threshold (short-circuit): 5 to 12 A; response threshold (external short-circuit to ground): 5 to 12 A; response threshold (external short-circuit to P potential): 25 to 45 A |
| Limitation of inductive shutdown voltage to | L+ (-2x 47 V) |
| Lamp load, max. | 10 W |
| Controlling a digital input | No |
| Output voltage |
| for signal "1", min. | L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V |
| Output current |
| for signal "1" rated value | 2 A |
| for signal "1" permissible range for 0 to 60 °C, min. | 20 mA |
| for signal "1" permissible range for 0 to 60 °C, max. | 2.4 A |
| for signal "0" residual current, max. | 0.5 mA |
| Parallel switching of 2 outputs |
| for increased power | No |
| for redundant control of a load | No |
| Switching frequency |
| with resistive load, max. | 30 Hz |
| with inductive load, max. | 0.1 Hz |
| on lamp load, max. | 10 Hz |
| Load resistance range |
| lower limit | 12 Ω |
| upper limit | 1 kΩ |
| Relay outputs |
| Switching capacity of contacts |
| at ohmic load, up to 50 °C, max. | 10 A |
| Cable length |
| Cable length, shielded, max. | 200 m |
| Cable length unshielded, max. | 200 m |
| Interrupts/diagnostics/status information |
| Diagnoses |
| Diagnostic functions | Yes |
| Diagnostic information readable | Yes |
| Diagnostics | Yes |
| Wire break | Yes |
| Short circuit | Yes |
| Missing load voltage | Yes |
| Diagnostics indication LED |
| Rated load voltage PWR (green) | Yes |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| between the channels | No |
| between the channels and the backplane bus | Yes |
| between the channels and the load voltage L+ | No |
| Isolation |
| Isolation checked with | 500 V DC |
| tested with |
| Channels against backplane bus and load voltage L+ | 500 V DC |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| acc. to EN 954 | Up to Cat. 4 |
| acc. to IEC 61508 | Up to SIL 3 |
| Dimensions |
| Width | 30 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight |
| Weight, approx. | 88 g |
| Status | Sep 10, 2011 |
